Netgear M4100-D10-POE Software Administration Manual - Page 88

ProSafe M4100 and M7100 Managed Switches 2. Assign IP addresses to ports. (Netgear Switch) #config (Netgear Switch) (Config)#interface 1/0/2 (Netgear Switch) (Interface 1/0/2)#routing (Netgear Switch) (Interface 1/0/2)#ip address 192.150.2.1 255.255.255.0 (Netgear Switch) (Interface 1/0/2)#exit (Netgear Switch) (Config)#interface 1/0/3 (Netgear Switch) (Interface 1/0/3)#routing (Netgear Switch) (Interface 1/0/3)#ip address 192.150.3.1 255.255.255.0 (Netgear Switch) (Interface 1/0/3)#exit (Netgear Switch) (Config)#exit 3. Specify the router ID, and enable OSPF for the switch. Set disable1583 compatibility to prevent a routing loop. (Netgear Switch) #config (Netgear Switch) (Config)#router ospf (Netgear Switch) (Config router)#enable (Netgear Switch) (Config router)#router-id 192.150.9.9 (Netgear Switch) (Config router)#no 1583compatibility (Netgear Switch) (Config router)#exit (Netgear Switch) (Config)#exit 4. Enable OSPF, and set the OSPF priority and cost for the ports. (Netgear Switch) #config (Netgear Switch) (Config)#interface 1/0/2 (Netgear Switch) (Interface 1/0/2)#ip ospf (Netgear Switch) (Interface 1/0/2)#ip ospf areaid 0.0.0.2 (Netgear Switch) (Interface 1/0/2)#ip ospf priority 128 (Netgear Switch) (Interface 1/0/2)#ip ospf cost 32 (Netgear Switch) (Interface 1/0/2)#exit (Netgear Switch) (Config)#interface 1/0/3 (Netgear Switch) (Interface 1/0/3)#ip ospf (Netgear Switch) (Interface 1/0/3)#ip ospf areaid 0.0.0.3 (Netgear Switch) (Interface 1/0/3)#ip ospf priority 255 (Netgear Switch) (Interface 1/0/3)#ip ospf cost 64 (Netgear Switch) (Interface 1/0/3)#exit (Netgear Switch) (Config)#exit 88 | Chapter 7. OSPF