Netgear M5300-28GF3 Software Administration Manual - Page 196
queues 1
View all Netgear M5300-28GF3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
ProSafe Managed Switch This policy uses the assign-queue attribute to put each department's traffic on a different egress queue. This is how the DiffServ inbound policy connects to the CoS queue settings established in the following example. (Netgear Switch) (Config)#policy-map internet_access in (Netgear Switch) (Config policy-map)#class finance_dept (Netgear Switch) (Config policy-class-map)#assign-queue 1 (Netgear Switch) (Config policy-class-map)#exit (Netgear Switch) (Config policy-map)#class marketing_dept (Netgear Switch) (Config policy-class-map)#assign-queue 2 (Netgear Switch) (Config policy-class-map)#exit (Netgear Switch) (Config policy-map)#class test_dept (Netgear Switch) (Config policy-class-map)#assign-queue 3 (Netgear Switch) (Config policy-class-map)#exit (Netgear Switch) (Config policy-map)#class development_dept (Netgear Switch) (Config policy-class-map)#assign-queue 4 (Netgear Switch) (Config policy-class-map)#exit (Netgear Switch) (Config policy-map)#exit 4. Attach the defined policy to interfaces 1/0/1 through 1/0/4 in the inbound direction. (Netgear Switch) (Config)#interface 1/0/1 (Netgear Switch) (Interface 1/0/1)#service-policy in internet_access (Netgear Switch) (Interface 1/0/1)#exit (Netgear Switch) (Config)#interface 1/0/2 (Netgear Switch) (Interface 1/0/2)#service-policy in internet_access (Netgear Switch) (Interface 1/0/2)#exit (Netgear Switch) (Config)#interface 1/0/3 (Netgear Switch) (Interface 1/0/3)#service-policy in internet_access (Netgear Switch) (Interface 1/0/3)#exit (Netgear Switch) (Config)#interface 1/0/4 (Netgear Switch) (Interface 1/0/4)#service-policy in internet_access (Netgear Switch) (Interface 1/0/4)#exit 5. Set the CoS queue configuration for the (presumed) egress interface 1/0/5 such that each of queues 1, 2, 3, and 4 gets a minimum guaranteed bandwidth of 25 percent. All queues for this interface use weighted round robin scheduling by default. The DiffServ inbound policy designates that these queues are to be used for the departmental traffic through the 196 | Chapter 12. DiffServ