Netgear M5300-28GF3 Software Administration Manual - Page 65

ProSafe Managed Switch • The Preference field is optional. A value of 1 (highest) will be assigned by default if not specified. 4. Click the Add button on the bottom of the screen. This creates the default route entry in the routing table. Add a Static Route when the switch performas IP routing, it forwards the packet to the default route for a destination that is not in the same subnet as the source address. However, you can set a path (static route) that is different than the default route if you prefer. The following procedure shows how to add a static route to the switch routing table. CLI: Add a Static Route The following commands assume the switch already has a defined a routing interface with a network address of 10.10.10.0, and is configured so that all packets destined for network 10.10.100.0 take the path of routing port. (FSM7328S) #show ip route Total Number of Routes 1 Network Subnet Next Hop Next Hop AddressMaskProtocolIntfIP Address 10.10.10.0 255.255.255.0 Local 1/0/3 10.10.10.1 To delete the static route, simply add "no" keyword in the front of the "ip route" command. Chapter 4. Port Routing | 65