Netgear MBR1210-1BMCNS MBR1210 User Manual (ENGLISH & FRANÇAIS) - Page 83
Basic Functioning, The Internet LED is lit.
View all Netgear MBR1210-1BMCNS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Mobile Broadband 11n Wireless Router MBR1210 User Manual Basic Functioning After you turn on power to the router, the following sequence of events should occur: 1. When power is first applied, verify that the Power LED is on. 2. After approximately 10 seconds, verify that: a. The Power LED is still solid green. An amber light indicates the unit has failed its power-on self-test (POST). b. The Internet LED is lit. c. The Wi-Fi radio LED is lit. The Wi-Fi radio is on by default. d. The Ethernet LAN port LED is lit when any local ports are connected. If a LAN port's LED is lit, a link has been established to the connected device. If a LAN port is connected to a 100 Mbps device, verify that the port's LED is green. If the port is 10 Mbps, the LED is amber. e. The Ethernet WAN port LED is lit when the router is connected to a wired modem. f. The Signal LED is lit when the router has detected a mobile broadband signal. • A blue LED indicates excellent coverage. • A green LED indicates good coverage. • An amber LED indicates marginal coverage. If any of these conditions does not occur, refer to the following table. LED Power Power LED is off. Power LED is amber. Action • Make sure the power cord is correctly connected to your router, and that the power supply adapter is correctly connected to a functioning power outlet. • Check that you are using the power adapter supplied by NETGEAR for this product. • If the error persists, you might have a hardware problem and should contact Technical Support. There is a fault within the router. Try to clear the fault as follows: • Cycle the power to see if the router recovers. • Clear the router's configuration to factory defaults. This sets the router's IP address to 192.168.0.1. This procedure is explained in Restoring the Default Configuration and Password on page 91. If the error persists, you might have a hardware problem and should contact Technical Support. Chapter 6. Troubleshooting | 83