Netgear ME101 ME101 User Manual - Page 7
and Wireless LAN - wireless en bridge
UPC - 606449026634
View all Netgear ME101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
4. Turn off the gaming console or other Ethernet-enabled device. Default Ethernet DC in 5V Antenna ME101 Wireless Ethernet Bridge Gaming console or other Ethernet-enabled device 5 Connect the provided Ethernet cable between the ME101 Wireless Bridge and the gaming console or other Ethernet-enabled device. Note: The ME101 Wireless Bridge should be connected to one device only. Don't connect it through a network switch or hub. 6. Connect the power adapter to the wireless bridge and plug the power adapter in to a power outlet. The Power and Wireless LAN lights should light up. 7. After you see the Wireless LAN light Ethernet-enabled device. light up, turn on the gaming console or other If the bridge and the Ethernet-enabled device are successfully connected, the Network light will light up. This light flashes when there is network activity. Note: If your setup works with the default settings, you don't need to install the software from the provided CD to configure the bridge unless you need to change the Country/Region setting from the default setting (U.S.A.). 5