Netgear PL1000 Installation Guide - Page 10

Troubleshooting Tips Power LED is off. Power LED is amber. Pick A Plug LED is off. Make sure that power is supplied to the electrical outlet, and that the Powerline devices are not plugged into an extension cord, power strip, or surge protector. Power saving mode occurs when the Ethernet LED is off. This can occur in the following circumstances: • The Ethernet cable is unplugged. • The device that is connected through the Ethernet cable is turned off. • The adapter is idle for 10 minutes. It returns to normal mode within two seconds after the Ethernet link is established. • If you already set network security, make sure that all Powerline devices are using the same encryption key; for information see the online user manual. • Press the Factory Reset button on each device for one second to return the Powerline adapter to its factory default settings. 10