Netgear PLW1000 Installation Guide - Page 13
Troubleshooting Tips - manual
![]() |
View all Netgear PLW1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Troubleshooting Tips Power LED is off. Power LED is amber. Pick A Plug LED is off. Pick A Plug LED is amber or red. Make sure that power is supplied to the electrical outlet, and that the PowerLINE devices are not plugged into an extension cord, power strip, or surge protector. Power saving mode occurs when the Ethernet LED is off. This can occur in the following circumstances: • The Ethernet cable is unplugged. • The device that is connected through the Ethernet cable is turned off. • The adapter is idle for 10 minutes. It returns to normal mode within two seconds after the Ethernet link is established. • If you already set network security, make sure that all PowerLINE devices are using the same encryption key; for informtion see the online user manual. • Press the Factory Reset button on each device for one second to return the PowerLINE adapter to its factory default settings. Something is interfering with communication between adapters. To resolve this, do the following: • Move the adapters to other outlets. • Unplug devices that might be causing interference such as surge suppressors and items with motors. 13
![](/manual_guide/products/netgear-plw1000-installation-guide-64b501e/13.png)