Netgear RBK12 User Manual - Page 82
Set up a bridge for a port group, ADVANCED > Advanced Setup > VLAN/Bridge Settings
View all Netgear RBK12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Orbi Whole Home AC1200 Mesh WiFi System Note: If your ISP provides directions on how to set up a bridge for IPTV and Internet service, follow those directions. Note: This feature is only supported if the router is in router mode. Set up a bridge for a port group If the device that is connected to the router's Ethernet port is an IPTV device, your ISP might require you to set up a bridge for a port group for the router's Internet interface. A bridge with a port group prevents packets that are sent between the IPTV device and the router's Internet port from being processed through the router's Network Address Translation (NAT) service. To configure a port group and enable the bridge: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the Orbi admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > VLAN/Bridge Settings. The VLAN/Bridge Settings page displays. 5. Select the Enable VLAN/Bridge Settings check box. The page expands. 6. Select the By bridge group radio button. The section expands. 7. Select the Port1 check box. 8. If a VLAN ID is required, select the Enable VLAN ID check box and enter the VLAN ID in the field. The VLAN ID can be a value from 1 to 4094. 9. Click the Apply button. Your settings are saved. Specify Network Settings 82 User Manual