Home » Netgear Manuals » Wireless » Netgear RBK752 » Manual Viewer

Netgear RBK752 User Manual - Page 36

Router's IPv6 Address on LAN, Use These DNS Servers

Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Orbi Whole Home Tri-Band Mesh WiFi 6 System length of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. • Router's IPv6 Address on LAN. This field shows the IPv6 address that is acquired for the router's LAN interface. The number after the slash (/) is the length of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. 6. In the Login field, enter the login information for the ISP connection. This is usually the name that you use in your email address. For example, if your main mail account is [email protected], you would type JerAB in this field. Some ISPs (like Earthlink and Deutsche Telekom) require that you use your full email address when you log in. If your ISP requires your full email address, type it in this field. 7. In the Password field, enter the password for the ISP connection. 8. In the Service Name field, enter a service name. If your ISP did not provide a service name, leave this field blank. Note: The default setting of the Connection Mode field is Always On to provide a steady IPv6 connection. The router never terminates the connection. If the connection is terminated, for example, when the modem is turned off, the router attempts to reestablish the connection immediately after the PPPoE connection becomes available again. 9. Select an IPv6 Domain Name Server (DNS) Address radio button: • Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP automatically assigns this address. • Use These DNS Servers. If you know that your ISP requires specific servers, select this option. Enter the IP address of your ISP's primary DNS server. If a secondary DNS server address is available, enter it also. 10. Select an IP Address Assignment radio button: • Use DHCP Server. This method passes more information to LAN devices, but some IPv6 systems might not support the DHCv6 client function. • Auto Config. This is the default setting. This setting specifies how the router assigns IPv6 addresses to the devices on your home network (the LAN). 11. (Optional) Select the Use This Interface ID check box and specify the interface ID that you want to be used for the IPv6 address of the router's LAN interface. Specify Your Internet Settings 36 User Manual

Section	Page
Contents	3
1. Overview	7
Orbi router overview	8
Orbi router hardware features	8
Orbi router LED behavior	9
Orbi satellite overview	10
Orbi satellite hardware features	10
Orbi satellite LED behavior	10
Connect your router	12
Place your Orbi satellite	13
Sync your Orbi satellite with your Orbi router	13
2. Connect to the Network and Access the Router	14
Connect to the network	15
Wired connection	15
WiFi connection	15
WiFi connection using WPS	16
Types of logins	16
Router and satellite labels	16
Set up and manage with the NETGEAR Orbi app	17
Use a web browser to access the router	18
Use the automatic Internet setup option	18
Log in to the Orbi router web interface	20
Change the language	20
3. Specify Your Internet Settings	21
Manually set up the Internet connection	22
Specify an Internet connection without a login	22
Specify an Internet connection that uses a login	23
Manage an IPv6 Internet connection	25
Requirements for entering IPv6 addresses	25
Specify IPv6 Internet connections	25
Use auto detection for an IPv6 Internet connection	26
Use auto configuration for an IPv6 Internet connection	27
Set up an IPv6 6rd tunnel Internet connection	28
Set up an IPv6 6to4 tunnel Internet connection	30
Set up an IPv6 pass-through Internet connection	32
Set up an IPv6 fixed Internet connection	32
Set up an IPv6 DHCP Internet connection	33
Set up an IPv6 PPPoE Internet connection	35
Change the MTU size	37
4. Control Access to the Internet	39
Allow or block access to your network	40
Use keywords to block Internet sites	41
Delete keywords that are used to block Internet sites	42
Avoid blocking on a trusted computer	43
Block services from the Internet	43
Manage network access control lists	45
Schedule when to block Internet sites and services	45
Set up security event email notifications	46
5. Optimize Performance	49
Enable or disable Wi-Fi Multimedia Quality of Service	50
Improve network connections with Universal Plug and Play	51
6. Specify Network Settings	53
View or change WAN settings	54
Manage Dynamic DNS	55
Set up a new Dynamic DNS account	55
Specify a Dynamic DNS account that you already created	56
Change the Dynamic DNS settings	57
Set up a default DMZ server	58
Change the router’s device name	59
Change the LAN TCP/IP settings	59
Use the router as a DHCP server	61
Disable the DHCP server feature in the router	62
Manage reserved LAN IP addresses	63
Reserve an IP address	63
Edit a reserved IP address	64
Delete a reserved IP address entry	64
Manage custom static routes	65
Set up a static route	65
Edit a static route	66
Delete a static route	67
Specify basic WiFi settings	68
Change the WiFi password or security level	69
Set up a guest WiFi network	70
Change your region	71
Use the router as a WiFi access point only	72
Set up router mode	73
Generate a new backhaul password	74
Set up a bridge for a port group or VLAN tag group	74
Set up a bridge for a port group	75
Set up a bridge for a VLAN tag group	76
Get Multi-Gig Internet with Internet port aggregation	77
7. Manage Your Network	79
Update the router and satellite firmware	80
Check for firmware updates	80
Manually update firmware	81
Manually update satellite firmware	81
Manually update router firmware	82
Change the admin password	83
Enable admin password reset	83
Reset the admin password	84
View router status and usage information	85
Display Internet port statistics	85
Check the Internet connection status	86
View satellite status	87
View and manage logs of router activity	88
View devices connected to the network or edit device information	89
View devices connected to the network	89
Edit device information on the Attached Devices page	90
View satellites connected to the network or edit satellite information	90
View satellites connected to the network	90
Edit satellite information that displays on the Attached Devices page	91
Monitor Internet traffic	92
Manage the router configuration file	93
Back up settings	94
Restore configuration settings	94
Erase the current configuration settings	95
Set up remote management	95
Use remote access	97
Remotely access your router using the Orbi app	97
8. Customize Internet Traffic Rules for Ports	98
Manage port forwarding to a local server	99
Set up port forwarding to a local server	99
Add a custom port forwarding service	100
Edit a port forwarding service	101
Delete a port forwarding entry	102
How the router implements the port forwarding rule	102
Application example: Make a local web server public	103
Manage port triggering	103
Add a port triggering service	104
Disable port triggering or change the time-out period	105
Application example: Port triggering for Internet Relay Chat	105
9. Use VPN to Access Your Network	107
Set up a VPN connection	108
Specify VPN service in the router	108
Install OpenVPN software	109
Install OpenVPN software on your Windows-based computer	109
Install OpenVPN software on your Mac computer	112
Install OpenVPN software on an iOS device	113
Install OpenVPN software on an Android device	113
Use a VPN tunnel on your Windows-based computer	114
Use VPN to access your Internet service at home	116
Set up VPN client Internet access in the router	116
Block VPN client Internet access in the router	117
Use a VPN tunnel to access your Internet service at home	117
10. Troubleshooting	118
Quick tips	119
Sequence to restart your network	119
WiFi settings	119
Network settings	119
The router and satellite do not sync	119
You cannot log in to the router	120
You cannot access the Internet	121
Troubleshoot Internet browsing	122
Troubleshoot PPPoE	123
Troubleshoot WiFi connectivity	123
Troubleshoot your network using the ping utility	124
Test the LAN path to your router	124
Test the path from your computer to a remote device	125
11. Supplemental Information	127
Factory settings	128
Factory settings for Orbi router model RBR750	128
Factory settings for Orbi satellite model RBS750	130
Technical specifications	132
Technical specifications for Orbi router model RBR750	132

Match case Limit results 1 per page

length of the prefix, which is also indicated by the underline (_) under the IPv6

address. If no address is acquired, the field displays Not Available.

•

Router’s IPv6 Address on LAN

. This field shows the IPv6 address that is acquired

for the router’s LAN interface. The number after the slash (/) is the length of the

prefix, which is also indicated by the underline (_) under the IPv6 address. If no

address is acquired, the field displays Not Available.

In the

field, enter the login information for the ISP connection.

This is usually the name that you use in your email address. For example, if your main

mail account is [email protected], you would type JerAB in this field. Some ISPs (like

Earthlink and Deutsche Telekom) require that you use your full email address when

you log in. If your ISP requires your full email address, type it in this field.

In the

Password

field, enter the password for the ISP connection.

In the

Service Name

field, enter a service name.

If your ISP did not provide a service name, leave this field blank.

Note:

The default setting of the

Connection Mode

field is Always On to provide a

steady IPv6 connection. The router never terminates the connection. If the connection

is terminated, for example, when the modem is turned off, the router attempts to

reestablish the connection immediately after the PPPoE connection becomes available

again.

Select an IPv6 Domain Name Server (DNS) Address radio button:

•

Get Automatically from ISP

. Your ISP uses DHCP to assign your DNS servers.

Your ISP automatically assigns this address.

•

Use These DNS Servers

. If you know that your ISP requires specific servers, select

this option. Enter the IP address of your ISP’s primary DNS server. If a secondary

DNS server address is available, enter it also.

10. Select an IP Address Assignment radio button:

•

Use DHCP Server

. This method passes more information to LAN devices, but

some IPv6 systems might not support the DHCv6 client function.

•

Auto Config

. This is the default setting.

This setting specifies how the router assigns IPv6 addresses to the devices on your

home network (the LAN).

11. (Optional) Select the

Use This Interface ID

check box and specify the interface ID

that you want to be used for the IPv6 address of the router’s LAN interface.

User Manual

Specify Your Internet Settings

Orbi Whole Home Tri-Band Mesh WiFi 6 System