Netgear RP614 RP614v3 Setup Manual - Page 10

NETGEAR Router Setup Manual The Front Panel The front panel of the router includes these status lights. Figure 2-1: router Front Panel You can use the status lights to verify connections. Viewed from left to right, the table below describes the lights on the front panel of the router. Table 2-1. Status Light Descriptions Label Power Test Internet LAN Activity On Green Solid Off Blinking Off On Blink On (Green) Blink (Green) On (Yellow) Blink (Yellow) Off Description Power is supplied to the router. Power is not supplied to the router. The router is performing its diagnostic test. The router successfully completed its diagnostic test. The Internet port has detected a link with an attached device. Data is being transmitted or received by the Internet port. The LAN (local area network) port has detected link with a 100 Mbps device. Data is being transmitted or received at 100 Mbps. The Local port has detected link with a 10 Mbps device. Data is being transmitted or received at 10 Mbps. No link is detected on this port. 2-2 Getting to Know Your NETGEAR Wireless Router August 2004