Netgear WAX630 User Manual - Page 22
Set up and connect the access point to your network
View all Netgear WAX630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Insight Managed WiFi 6 AX6000 Tri-band Multi-Gig Access Point Model WAX630 - Mirrors - Brick - Concrete If you are using adjacent standalone access points, use different radio frequency channels to reduce interference. For more information, see Change the channel for a radio on page 96. Set up and connect the access point to your network You can connect the access point to a Power over Ethernet plus (PoE++, 802.3bt) switch in your network. The switch must be connected to a network router that is connected to the Internet. If you use a PoE++ connection, the access point does not require a power adapter. Note: Depending on the product ordered, the package might not include a power adapter. You power up the access point by connecting it to a PoE++ switch. If you ordered a package without a power adapter but do not want to use a PoE++ connection, you can still order a power adapter as an option. If connected to 2.5 Gbps equipment, the access point LAN 1/PoE++ port supports Ethernet speeds up to 2.5 Gbps within your LAN. The following figure show a NETGEAR MS510TXUP switch, which supports speeds of 2.5 Gbps and higher, as well as PoE++. If your Internet connection, modem, router, and switch support a speed of 2.5 Gbps, the access point's Internet connection also functions at 2.5 Gbps. Otherwise, the Internet connection functions at 1 Gbps, which is a common speed. Figure 5. Set up the access point with a PoE++ connection to your network Install the Access Point in Your 22 Network and Access It for Initial Configuration User Manual