Netgear WG102 WG102 Reference Manual - Page 45
Radius Server Settings, Authentication/Access Control Radius Server Configuration, IP Address
UPC - 606449037678
View all Netgear WG102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102 2. Click Radius Server Settings in the Security menu. Figure 3-12: Radius Server Settings menu 3. Enter the Radius settings. • Authentication/Access Control Radius Server Configuration: This configuration is required for authentication using Radius. IP Address, Port No. and Shared Secret is required for communication with Radius Server. A Secondary Radius Server can be configured which is used on failure on Primary Radius Server • IP Address: The IP address of the Radius Server. The default is 0.0.0.0. • Port Number: Port number of the Radius Server. The default is 1812. • Shared Secret: This is shared between the Wireless Access Point and the Radius Server while authenticating the supplicant. • Re-authentication Time: The time interval in seconds after which the supplicant will be authenticated again with the Radius Server. The default is 3600 seconds. Basic Installation and Configuration 202-10064-02, June 2005 3-23