Netgear WG102 WG102 Reference Manual - Page 53
Global-key Re-Key Time, WEP/WPA Settings
UPC - 606449037678
View all Netgear WG102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102 • Shared Secret: This is shared between the Wireless Access Point and the Radius Server while authenticating the supplicant. • Re-authentication Time: The time interval in seconds after which the supplicant will be authenticated again with the Radius Server. The default is 3600 seconds. • Global-key Re-Key Time: Check on this option to enable Re-keying of Global Key. The Global Key Re-Key can be done based on time interval in seconds or number of packets exchanged using the global key. The default is 3600 seconds. • Update if any station disassociates: Check on this option to refresh global key when any stations disassociated with wireless Access Point. • Accounting Radius Server Configuration: This configuration is required for accounting using Radius Server. IP Address, Port No. and Shared Secret is required for communication with Radius Server. A Secondary Radius Server can be configured which is used on failure on Primary Radius Server. • IP Address: The IP address of the Radius Server. The default is 0.0.0.0. • Port Number: Port number of the Radius Server. The default is 1813. • Shared Secret: This is shared between the Wireless Access Point and the Radius Server while authenticating the supplicant. 4. Click Apply to save your settings. 5. Click WEP/WPA Settings in the Security menu. Figure 3-19: WEP/WPA Settings menu Basic Installation and Configuration 202-10064-02, June 2005 3-31