Netgear WG302v1 WG302v1 Reference Manual - Page 54
Configuring WPA-PSK and WPA2-PSK
View all Netgear WG302v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual Figure 2-17. 5. From the Network Authentication drop-down menu, select WPA & WPA2 with RADIUS from the list. By default, Data Encryption will be set to TKIP+AES. 6. Wireless Client Security Separation is disabled by default. If enabled, associated wireless clients will not be able to communicate with each other. (This feature is intended for hotspots and other public access situations. 7. Click Apply to save your settings. Configuring WPA-PSK and WPA2-PSK Not all wireless adapters support WPA and WPA2. Client software is required on the client: • Windows XP and Windows 2000 with Service Pack 3, or above, do include the client software that supports WPA. The wireless adapter hardware and driver must also support WPA. • Service Pack 3 does not include the client software that supports WPA2. Make sure your client card supports WPA2. The wireless adapter hardware and driver must also support WPA2. Consult the product documentation for your wireless adapter; WPA client software for instructions on configuring WPA settings; and WPA2 client software for instructions on configuring WPA2 settings. To configure WPA-PSK and WPA2-PSK: 1. From the Network Authentication drop-down menu, select WPA-PSK & WPA2-PSK. By default, Data Encryption will be set to TKIP+AES. 2-30 v4.0, April 2006 Basic Installation and Configuration