Netgear WGR614NA WGR614v9 Setup Manual - Page 23

Help with Troubleshooting, Basic Troubleshooting, Common Things That Can Go Wrong - lights

Page 23 highlights

Help with Troubleshooting This section gives information about troubleshooting your router. You can find help with the following problems: • "Common Things That Can Go Wrong" • "Basic Functions Are Not Working" on page 20 • "I Am Unable to Log In to the Router" on page 21 • "The Internet Service Connection Is Not Working" on page 22 • "Testing the Path from a PC to Your Router" on page 24 • "Testing the Path from a PC to the Internet" on page 25 Basic Troubleshooting Here are some tips for correcting simple problems you might have. Common Things That Can Go Wrong Verify that you do not have these common problems. Be sure to always start your network in this sequence: 1. Turn off and unplug the modem from its power outlet, and turn off the router and computer. 2. Turn on the modem, and wait 2 minutes. 3. Turn on the router, and wait 1 minute. 4. Turn on the computer. Make sure that the Ethernet cables are securely plugged in: 1. Verify that the Internet status light on the router is lit if the Ethernet cable to the router from the modem is plugged in securely and the modem and router are both turned on (see "Router Front Panel" on page 3). 2. Verify that for each powered-on computer connected to the router with a securely plugged in Ethernet cable, the corresponding router LAN port status light is lit (see "Router Front Panel" Help with Troubleshooting 19 v1.0, October 2007

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

Help with Troubleshooting
19
v1.0, October 2007
Help with Troubleshooting
This section gives information about troubleshooting your router. You can find help with the
following problems:
“Common Things That Can Go Wrong”
“Basic Functions Are Not Working” on page 20
“I Am Unable to Log In to the Router” on page 21
“The Internet Service Connection Is Not Working” on page 22
“Testing the Path from a PC to Your Router” on page 24
“Testing the Path from a PC to the Internet” on page 25
Basic Troubleshooting
Here are some tips for correcting simple problems you might have.
Common Things That Can Go Wrong
Verify that you do not have these common problems.
Be sure to always start your network in this sequence:
1.
Turn off and unplug the modem from its power outlet, and turn off the router and computer.
2.
Turn on the modem, and wait 2 minutes.
3.
Turn on the router, and wait 1 minute.
4.
Turn on the computer.
Make sure that the Ethernet cables are securely plugged in:
1.
Verify that the Internet status light on the router is lit if the Ethernet cable to the router from
the modem is plugged in securely and the modem and router are both turned on (see
“Router
Front Panel” on page 3
).
2.
Verify that for each powered-on computer connected to the router with a securely plugged in
Ethernet cable, the corresponding router LAN port status light is lit (see
“Router Front Panel”