Netgear WGT624v2 WGT624v2 Reference Manual - Page 109
Select TCP/IP, and then click OK., If you need TCP/IP
View all Netgear WGT624v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v2 You must have an Ethernet adapter, the TCP/IP protocol, and Client for Microsoft Networks. Note: It is not necessary to remove any other network components shown in the Network window in order to install the adapter, TCP/IP, or Client for Microsoft Networks. If you need to install a new adapter, follow these steps: a. Click the Add button. b. Select Adapter, and then click Add. c. Select the manufacturer and model of your Ethernet adapter, and then click OK. If you need TCP/IP: a. Click the Add button. b. Select Protocol, and then click Add. c. Select Microsoft. d. Select TCP/IP, and then click OK. Preparing Your Network C-3 M-10153-01
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v2
Preparing Your Network
C-3
M-10153-01
You must have an Ethernet adapter, the TCP/IP protocol, and Client for Microsoft Networks.
If you need to install a new adapter, follow these steps:
a.
Click the Add button.
b.
Select Adapter, and then click Add.
c.
Select the manufacturer and model of your Ethernet adapter, and then click OK.
If you need TCP/IP:
a.
Click the Add button.
b.
Select Protocol, and then click Add.
c.
Select Microsoft.
d.
Select TCP/IP, and then click OK.
Note:
It is not necessary to remove any other network components shown in the
Network window in order to install the adapter, TCP/IP, or Client for Microsoft
Networks.