Netgear WN370 Installation Guide - Page 1
Netgear WN370 Manual
View all Netgear WN370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Installation Guide ProSAFE® Wall Mount Access Point WN370 Package Contents Unpack the box and verify the contents: • ProSAFE® Wall Mount Access Point WN370 • Mounting bracket with four mounting screws • Warranty card • Software license agreement • Regulatory flyer • Installation Guide Installation Requirements You must have the following items to successfully install your access point: • A 6mm Phillips screwdriver • A T8 screwdriver • A computer running Windows XP or Windows 7 • A Standard EU or US wall outlet junction box with an ethernet cable routed through the wall from your LAN to the junction box • An IEEE 802.3af/at compliant PoE switch or IEEE 802.3af/at compliant PoE injector Mount the Access Point The access point requires an electrical outlet junction box mounted in a wall. To mount the access point to the wall: 1. Remove the faceplate from the outlet junction box. 2. Run the Ethernet cable through the junction box with enough slack to reach the access point. 3. Run the Ethernet cables through the mounting bracket. 4. Align the mounting bracket with the holes on the junction box. 5. Attach the mounting bracket to the junction box using the included Phillips head screws. 7. (Optional) Connect the Ethernet cable providing pass through support to the pass through port on the back of the access point. 8. Mount the access point to the mounting bracket using the included T8 screws. 6. Connect the Ethernet cable providing PoE and network connectivity to the PoE port on the back of the access point. Set Up the Access Point The WN370 access point can only be deployed in a network managed by a ProSAFE WC7600 wireless controller. If you have a DHCP server in your network, option 43 must be enabled pointing towards the IP address of the WC7600. To discover and configure the access point using the WC7600 wireless controller: 1. Access the wireless controller at the network IP address that you configured. 2. Select Access Point > Discovery > Discovery Wizard. 3. Follow the steps onscreen to discover the access point and review the discovery results.