Netgear WN604-100NAS Reference Manual - Page 32
Time Zone., USA-Pacific, NTP Client., Use Custom NTP Server., Hostname / IP Address., Apply.
View all Netgear WN604-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
NETGEAR Wireless N150 Access Point WN604 Reference Manual Figure 2-5 Timezone and system time related settings 2. Configure the following information: - Time Zone. From the pull-down menu, select the local time zone for your wireless access point from a list of all available time zones. The default is USA-Pacific. - NTP Client. Enable NTP Client to synchronize the time of the access point with an NTP Server. The Default is Enabled. Note: You must have an Internet connection to get the current time. - Use Custom NTP Server. Check the option if you have a custom NTP server. The default is Disabled. - Hostname / IP Address. Enter the host name or the IP address of the custom NTP server. The default is time-b.netgear.com. 3. Click Apply. 2-8 Basic Installation and Configuration v1.0, March 2010