Netgear WNA3100 WNA3100 User Manual - Page 13
Use Smart Wizard Automatic Configuration to Connect to a Wireless Network, Use Smart Wizard Automatic - wireless n 300 usb adapter drivers
UPC - 606449067774
View all Netgear WNA3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Wireless-N 300 USB Adapter WNA3100 User Manual 3. Click Next. The WNA3100 v1 software detects the adapter. Follow the onscreen prompts to install the driver. 4. Follow the prompts to complete the installation. How you connect to a network depends on what you selected during custom installation. • For automatic configuration, see the following section, "Use Smart Wizard Automatic Configuration to Connect to a Wireless Network." • If you selected manual configuration, the Settings tab displays. See "Joining a Network" on page 2-2. • To use a Windows utility, see your Windows documentation or the NETGEAR application note at http://documentation.netgear.com/reference/enu/winzerocfg/index.htm. Use Smart Wizard Automatic Configuration to Connect to a Wireless Network After the driver is installed, you are prompted to connect to a wireless network. 1. One of the following screens displays: No WPS-capable networks in your area Figure 1-5 WPS-capable networks in your area • If no WPS networks are in your area, select your wireless network from the list and click Next. If you select a secured network, you need to enter the passphrase or network key. 1-5 v1.0, December 2009