Netgear WNDRMACv2 WNDRMAC User Manual - Page 70
Set Password, Password Recovery
View all Netgear WNDRMACv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
N600 Wireless Dual Band Gigabit Router WNDRMAC You can either use the Restore Factory Settings button on the back of the router (see Factory Default Settings on page 104), or you can click the Erase button in this screen. Erase sets the user name to admin, the password to password, and the LAN IP address to 192.168.1.1, and enables the router's DHCP. Set Password This feature allows you to change the default password that is used to log in to the router with the user name admin. This is not the same as changing the password for wireless access. The label on the bottom of your router shows your unique wireless network name (SSID) and password for wireless access (see Label on page 10). To set the password for the user name admin: 1. Select Advanced > Administration > Set Password to display the following screen: 2. Type the old password and type the new password twice in the fields on this screen. 3. If you want to be able to recover the password, select the Enable Password Recovery check box. 4. Click Apply so that your changes take effect. Password Recovery NETGEAR recommends that you enable password recovery if you change the password for the router's user name of admin. Then you will have an easy way to recover the password if it is forgotten. This recovery process is supported in Internet Explorer, Firefox, and Chrome browsers, but not in the Safari browser. Administration 70