Netgear WNR1000-100NAS WNR1000 User Manual - Page 39
Push Button Configuration, Using the Physical Push Button
View all Netgear WNR1000-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
N150 Wireless Router WNR1000 User Manual • "Push Button Configuration" • "Security PIN Entry" on page 2-14 Push Button Configuration There are two methods to enable a wireless client to join a network using a push button on the router: using the physical push button or using the software button in the Add WPS Client screen. Using the Physical Push Button 1. Press the button on the rear of the N150 Wireless Router for over 5 seconds. For information about the WPS light, see the NETGEAR N150 Wireless Router Setup Manual. The green light begins to blink in a regular pattern. While the light is blinking, you have 2 minutes to enable WPS on the client that you are trying to connect to the router. 2. On the wireless client, follow its specific networking instructions to enable WPS, to allow it to connect to the router. The N150 Wireless Router's green these conditions occurs: light ceases blinking and remains on when one of • The router and the client establish a wireless connection. • The 2-minute window period expires for establishing a WPS connection. If the connection is not established, no WPS security settings will be specified in the N150 Wireless Router. Using the Software Button in the Add WPS Client Screen 1. Log in to the router as described in "Logging In To Your Wireless Router" on page 1-2. 2. Select Add WPS Client in the main menu, and click Next. 3. Select the Push Button setup method. Figure 2-6 Safeguarding Your Network v1.0, January 2009 2-13