Netgear WNR1000-100NAS WNR1000 User Manual - Page 40
Security PIN Entry, Using the Router's Security PIN, Using the Wireless Client's Security PIN
View all Netgear WNR1000-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
N150 Wireless Router WNR1000 User Manual 4. Click the button in the Add WPS Client screen. The Connecting to New Wireless Client screen displays. Figure 2-7 The green light on the N150 Wireless Router begins to blink in a regular pattern. While the button light is blinking, you have 2 minutes to enable WPS on the device you are trying to connect to the router. 5. In the wireless client, follow its specific networking instructions to enable WPS, to allow it to connect to the router. The N150 Wireless Router's green these conditions occurs: light ceases blinking and remains on when one of • The router and the client establish a wireless connection. • The 2-minute window period expires for establishing a WPS connection. If the connection is not established, no WPS security settings will be specified in the N150 Wireless Router. Security PIN Entry There are two ways to enable a wireless client to join a network using a PIN: using the router's security PIN or using the wireless client's security PIN. Using the Router's Security PIN 1. Obtain your router's security PIN from the rear panel of the router or from the Advanced Wireless Settings screen. 2. On the wireless client, follow its specific networking instructions to enter the router's security PIN and to establish a wireless connection with the router. Using the Wireless Client's Security PIN 1. Log in to the router as described in "Logging In To Your Wireless Router" on page 1-2. 2-14 v1.0, January 2009 Safeguarding Your Network