Netgear WNR1000-2VCNAS WNR1000v2 Setup Manual - Page 7

Table 1., Status Light Descriptions, You can use the status lights to verify various conditions. - firmware

Get Netgear WNR1000-2VCNAS PDF manuals and user guides View all Netgear WNR1000-2VCNAS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

You can use the status lights to verify various conditions. Table 1. Status Light Descriptions Label 1. Power Activity Solid Amber Solid Green Fast blink-Green Slow blink-Green 2. Push 'N' Connect Off Solid Green Blinking Green Off 3. Internet Solid Amber Solid Green Blinking Green Off 4. Wireless Solid Blue Blinking Blue Off Solid Green Blinking Green 5. LAN Solid Amber (Ports 1-4) Blinking Amber Off Description The router is performing the power-on self-test diagnostic. The power is on and the router is ready. A software update is in progress. Firmware is corrupted. See "Checking Basic Router Functions" on page 28 for instructions on restoring your router firmware. Power is not being supplied to the router Indicates that wireless security is enabled. WPS-capable devices can associate with the router within 2 minutes. No WPS connection exists. No IP address acquired. The wireless router has acquired an Internet address. Data is being communicated with the Internet. No Ethernet cable is connected to the modem. The wireless interface is enabled. Data is being communicated over the wireless network. The wireless interface is turned off. The local port is connected to a 100 Mbps device. Data is being transmitted at 100 Mbps. The local port is connected to a 10 Mbps device. Data is being transmitted at 10 Mbps. No link is detected on this port. Getting to Know Your Wireless Router 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
Getting to Know Your Wireless Router
3
You can use the status lights to verify various conditions.
Table 1.
Status Light Descriptions
Label
Activity
Description
1.
Power
Solid Amber
Solid Green
Fast blink–Green
Slow blink–Green
Off
The router is performing the power-on self-test diagnostic.
The power is on and the router is ready.
A software update is in progress.
Firmware is corrupted. See
“Checking Basic Router Functions” on
page 28
for instructions on restoring your router firmware.
Power is not being supplied to the router
2.
Push 'N'
Connect
Solid Green
Blinking Green
Off
Indicates that wireless security is enabled.
WPS-capable devices can associate with the router within 2
minutes.
No WPS connection exists.
3.
Internet
Solid Amber
Solid Green
Blinking Green
Off
No IP address acquired.
The wireless router has acquired an Internet address.
Data is being communicated with the Internet.
No Ethernet cable is connected to the modem.
4.
Wireless
Solid Blue
Blinking Blue
Off
The wireless interface is enabled.
Data is being communicated over the wireless network.
The wireless interface is turned off.
5.
LAN
(Ports 1–4)
Solid Green
Blinking Green
Solid Amber
Blinking Amber
Off
The local port is connected to a 100 Mbps device.
Data is being transmitted at 100 Mbps.
The local port is connected to a 10 Mbps device.
Data is being transmitted at 10 Mbps.
No link is detected on this port.