Nextar X3-08 User Manual - Page 7

Power Adaptor Using the Power Adaptor The GPS unit is supplied with a DC Adaptor for charging the internal battery and for powering the unit while in a vehicle. Connect the DC Adaptor Power Plug to the unit's power jack and plug the other end to the vehicle's 5V accessory/ cigarette socket, as shown below. Attention  Set up your destination and other settings before moving out into traffic. Do not access the controls of the GPS unit while driving.  Mount the unit so that it does not obstruct your view of the road.  When connected with adaptor, the LCD screen will be brighter than when it's not charging. About Rechargeable Battery Your portable GPS device comes with a built-in rechargeable Lithium-Ion battery. A fully charged battery delivers about 2 hours of use. It is recommended to use the DC Adaptor while in the vehicle. Working conditions and precautions for the rechargeable battery  Battery should only be used and charged when temperatures are between 32-100F.  Maintain well-ventilated conditions around the product to avoid overheating. Do not put the product on a blanket, clothing or anything that may block ventilation to the product.  When the battery is weak, an indication symbol will appear on the LCD screen and the unit will power off automatically after a few minutes. 7