Nikon 1666 Instruction Manual - Page 54

Specifications Type of camera 35mm single-lens reflex with electronically and mechanically controlled focal-plane shutter Applicable film 35mm film in a cartridge Frame size 24 × 36mm Lens mount Nikon F mount Shutter Vertical-travel, metal focal-plane shutter Shutter-speed settings A (aperture-priority auto): 8 to 1/4000 sec., electronic stepless control (indications are 1 to 1/4000) Manual: Bulb, 1 to 1/4000 sec., mechanical control Viewfinder Eye-level pentaprism Eyepoint 14mm (at -1.0 m-1) Focusing screen K3 type (splitprism-image microprism type, Clear Matte Screen IIa) standard, B3 type and E3 type optional Viewfinder frame coverage Approx. 93% (objective screen) Viewfinder magnification 0.83× with 50mm lens set to infinity Viewfinder information Shutter speed, exposure meter indication, shutter indication, direct aperture value, exposure compensation mark, ready light Reflex mirror Quick-return type Exposure meter sync Ai type (automatic compensation at full-aperture f-stop) Metering system TTL center-weighted, full-aperture exposure metering system, approx. 60% of the meter's sensitivity concentrated on a 12mm diameter circle Metering range EV1 to EV20 at ISO100 (with a 50mm f/1.4 lens) Film-sensitivity settings DX system or manual. DX: ISO 25 to 5000 Manual: ISO 12 to 6400 Exposure compensation Exposure compensated to ±2 EV in units of 1/3 EV (compensation to the + side not possible with ISO 12, and that to the - side not possible with ISO 6400) Auto exposure lock Enabled by pressing the AE lock button Film advance Lever provided, 30-degree standoff angle and 135degree winding angle, automatic film advance enabled with MD-12 Motor Drive (sold separately) Frame counter Additive type (S, 1 to 36), automatic reset Film rewinding Film rewind button and crank Self-timer Mechanical controlled, countdown time of approx. 4 to 10 seconds, cancellation possible Depth of field preview Can stop down lens aperture by pressing the depth of field lever Multiple exposure Activated with multiple exposure lever Sync contact X-contact only; synchronized with the flash at a low speed of under 1/250 sec. Flash control TTL flash: Enabled by using SB-28, SB-27, etc. in combination TTL flash compensation: Compensation to -1 EV activated with the TTL flash compensation button on the camera Film speed synchronization in TTL flash: ISO 12 to 1000 Sync terminal Equipped with sync terminal (ISO 519), locking screw type Accessory shoe Hot-shoe contact (ISO 518, sync contact, readylight contact, monitor contact, stop-signal contact for TTL flash) with a lock hole to prevent accidental dropping 54