Nikon 1723 Instruction Manual - Page 21
Gently close the camera back until the camera back snaps, closed.
UPC - 018208017232
View all Nikon 1723 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
3 Gently close the camera back until the camera back snaps closed . I t': Ic S FS.6 B~E::3 n3@ @ o z • The fi lm automatically advances to the final frame with blinking 0 , 0 _ , 0 __ , 0 __ _ as indicated in the LCD panel , and film rewinds one frame at a time as photos are i taken. The LCD panel indicates number of exposures left on film. • When the film has completed set up, a shutter sound is let out but no picture has aaw:; been taken. Q. • When E appears in the LCD panel, or Err and E in the LCD panel and 8_ in the viewfinder blink, film is not properly installed . Open the camera back again and reload fi lm by aligning the film leader to the red index mark. 8 blinks in the viewfinder when the film is not loaded. • Pictures taken on frames beyond the indicated number of the exposures for the film roll may be discarded in the process of developing . c : 001'ffil!J Warning indicat ions in t he viewfinder can be set not to appear (p. 74). OX-coded film With OX-coded film , film speed will be set automatically between ISO 25 to ISO 5000. Film speed is set to ISO 100 with non- OXcoded film. OX-coded fi lm ~ISO ~~ ~ 36 (film speed) OX mark Check points • Avoid direct sunlight when changing film outdoors. • You can check the number of avai lable exposures on the film roll and fil m speed through the film confirmation window. • Infrared films cannot be used with this camera since an infrared sensor is used for the detection of the film frame position. 21