Nikon 25366 Reference Manual - Page 60

Overview Using Camera Control Pro The Camera Menu Appendices Fine-Tune White Balance... D1-series D2-series D100 D200 D70S D70 Selecting this option displays the dialog shown at right, where white balance can be fine-tuned between -3 and +3. The value selected for Auto will be added to the white balance setting the camera chooses for auto white balance. Clicking Reset returns all values to defaults. Click OK to apply the current settings to the camera, or click Cancel to discard any changes and return to the Camera Control Pro window. 2/4 Set Color Temperature... D2-series D200 Selecting this option displays the dialog shown at right, where color temperature can be chosen from a menu. The value chosen takes effect whenever Choose color temp. is selected for white balance. Click OK to apply the current settings to the camera, or click Cancel to exit without saving changes. Measure White Balance... Use this option to measure preset white balance. If the camera currently connected supports multiple values for preset white balance, the setting that will be used to store the measured value can be chosen from the pop-up menu at the top of the dialog. Adjust camera settings as described in the section on preset white balance in the camera user's manual and click OK to measure a value for white balance. D2Xs (dialogs for other cameras may differ) Set Color Temperature... D2-series D200 The desired results may not be achieved with flash or fluorescent lighting. Choosing a Mode D70S D70 D50 The Measure White Balance... option is only available in P, S, A, and M modes. Return to first page 60