Nikon 25366 Reference Manual - Page 85
Windows 2000
UPC - 018208253661
View all Nikon 25366 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Overview Using Camera Control Pro Device Registration Appendices Windows 2000 1/8 Registering the IEEE 1394 Interface Board Confirm that your OHCI-compliant IEEE 1394 interface board or card has been correctly registered with the system. 1 Open the Device Manager. If the camera has been correctly registered with the system, the controller for your camera should appear under "1394 Bus host Controller." If "1394 Bus host Controller" is not listed in the Device Manager, or if the IEEE 1394 interface board or card is listed as an unknown or miscellaneous device or is preceded by a red or yellow warning icon, follow the instructions in the manual provided with the board to ensure that the drivers are properly installed. 2 Install the driver for D1-series cameras from the Camera Control Pro CD, then connect the camera to the computer using an IEEE 1394 cable and turn the camera on. The camera will be registered automatically. Logging On Log on as the "Administrator" when registering the camera. Updating Drivers for the D1 If you are already using the D1 with Nikon View DX or Nikon Capture, you will need to update the camera drivers. Before Connecting the Camera Be sure to install Camera Control Pro before connecting the camera to the computer. Return to first page 85