Nikon COOLPIX AW120 Product Manual - Page 240

Problem Camera turns off without warning. Monitor is blank. Monitor is hard to read. Date and time of recording are not correct. Cause/Solution • The camera automatically turns off to save power (auto off function). • The camera or battery has become too cold and cannot operate properly. • The inside of the camera has become hot. Leave the camera off until the inside of the camera has cooled, and then try turning it on again. • The camera turns off if the USB cable connecting it to a computer or printer is disconnected. Reconnect the USB cable. • The camera is off. • The camera has entered standby mode to save power. Press the power switch, shutter-release button, A button, c button, or b (e movie-record) button. • The flash lamp flashes while the flash is charging. Wait for the flash to charge. • The camera and computer are connected via the USB cable. • The camera and TV are connected via an HDMI cable. • Camera and smart device are connected using Wi-Fi connection and the camera is operated by remote control. • Adjust the monitor brightness. • The monitor is dirty. Clean the monitor. • If the camera clock has not been set, the "Date not set" indicator flashes during shooting and movie recording. Images and movies saved before the clock is set are dated "00/00/0000 00:00" or "01/01/2014 00:00" respectively. Set the correct time and date from the Time zone and date option in the setup menu. • The camera clock is not as accurate as ordinary watches or clocks. Periodically compare the time of the camera clock with that of a more accurate timepiece and reset as required. A 23 F4 - 92, 95, E23 22 23 48 92, 95 92, E21 89 76, E65 F7 18, 76, E63 Technical Notes and Index F10