Nikon COOLPIX AW120 Product Manual - Page 50

The Basics of Shooting and Playback 8 Read the message about the waterproof function, and press K. • There are 6 message screens. Do not open the covers by the water or in sandy locations, as foreign matter could enter the camera. 1/6 9 When you have read the message shown on the right, press the k button. • The camera switches to shooting mode (A22). After drying thoroughly, use a cloth to remove any droplets remaining on the areas indicated. 6/6 Exit C Changing the Language Setting and the Date and Time Setting • You can change these settings using the Language and Time zone and date settings in the z setup menu (A76). • You can enable or disable daylight saving time in the z setup menu by selecting Time zone and date followed by Time zone. Enabling daylight saving time moves the clock forward one hour, and disabling it moves the clock back one hour. C The Clock Battery • The camera's clock is powered by a built-in backup battery. The backup battery charges when the main battery is inserted into the camera or when the camera is connected to an optional AC adapter, and it can run the clock for several days after about 10 hours of charging. • If the camera's backup battery becomes exhausted, the date and time setting screen is displayed when the camera is turned on. Set the date and time again. See step 3 (A18) of "Preparation 4 Setting the Display Language, Date, and Time" for more information. C Imprinting the Shooting Date on Printed Images • You can permanently imprint the shooting date on images as they are captured by setting Print date in the setup menu (A76). • If you want the shooting date to be printed without using the Print date setting, print using the ViewNX 2 software (A94). 20