Nikon COOLPIX B500 Reference Guide PDF Edition - Page 845
WR-R11a, and WR-T10 Wireless Remote Controllers
View all Nikon COOLPIX B500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 845 highlights
˔ Microphones • ME-1 Stereo Microphone: Connect the ME-1 to the camera microphone jack to record stereo sound. Using an external microphone also reduces the chance of picking up equipment noise, such as the sounds produced during video recording when focus is achieved using autofocus. • ME-W1 Wireless Microphone: A wireless Bluetooth microphone. Use the ME-W1 for off-camera recording. ˔ Wireless Remote Controllers • WR-R11a, WR-R10, and WR-T10 Wireless Remote Controllers - When a WR-R11a is connected to the ten-pin remote terminal, or when a WR-R10 is connected to the ten-pin remote terminal using a WR-A10 adapter, the camera can be controlled remotely using a WR-T10 wireless remote controller. - WR-R11a and WR-R10 wireless remote controllers can also be used to control radio-controlled flash units. • WR-1 Wireless Remote Controller: WR-1 units are used with WR-R11a/ WR-R10 or WR-T10 wireless remote controllers or with other WR-1 remote controllers, with the WR-1 units functioning as either transmitters or receivers. When a WR-R11a/WR-R10 or a WR-1 configured as a receiver is connected to the camera ten-pin remote terminal, a second WR-1 configured as a transmitter can be used to take pictures and adjust camera settings remotely. Update the WR-1 firmware to the latest version (version 1.0.4 or later). * When using a wireless remote controller with the WR-R10, be sure the firmware for the WR-R10 has been updated to the latest version (version 3.0 or later). For information on firmware updates, see the Nikon website for your area. Consult a Nikon-authorized service representative when updating the firmware for the WR-R10 from versions prior to version 2.0 to version 3.0 or later. Compatible Accessories 845