Nikon COOLPIX S5300 Product Manual - Page 204
Connect to smart device, Channel, Options, Turn the camera off and then on again. If the error
View all Nikon COOLPIX S5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
Display No access. Could not connect. Wi-Fi connection terminated. Lens error Communications error System error Cause/Solution A The camera could not receive the signal from the smart device. Select Connect to smart device in the Wi-Fi options menu, and establish the wireless connection again. 81, E71 The camera failed to establish the connection while receiving the signals from the smart device. Set a different channel in Channel under Options in the Wi-Fi options menu, and establish the wireless connection again. 81, E71 A cable was connected to the camera while the camera and smart device were wirelessly connected, the battery level became low, or the connection was aborted due to poor connectivity. Disconnect the cable and establish the wireless connection again. 81, E71 A lens error occurred. Turn the camera off and then on again. If the error persists, contact your retailer or Nikon-authorized service 20 representative. An error occurred while communicating with the printer. Turn the camera off and reconnect the USB cable. E25 An error occurred in the camera's internal circuitry. Turn the camera off, remove and reinsert the battery, and turn the camera on. If the error persists, contact your retailer or Nikon-authorized service representative. 10, 20 Reference Section E92