Nikon D300 D300 User's Manual - Page 163
Select direct measurement mode., Measure white balance., Check the results., Viewfinder, Control panel
UPC - 018208254323
View all Nikon D300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
3 Select direct measurement mode. Release the WB button briefly and then press the button until the L icon in the control panel and viewfinder start to flash. A flashing D will also appear in the control panel and viewfinder. At default settings, the displays will flash for about six seconds. Control panel Viewfinder 4 Measure white balance. Before the indicators stop flashing, frame the reference object so that it fills the viewfinder and press the shutter-release button all the way down. The camera will measure a value for white balance and store it in preset d-0. No photograph will be recorded; white balance can be measured accurately even when the camera is not in focus. r 5 Check the results. If the camera was able to measure a value for white balance, C will flash in the control panel, while the viewfinder will show a flashing a. At default settings, the displays will flash for about six seconds. Control panel Viewfinder 137