Nikon D3200 User Manual - Page 30
Attach a Lens - body
View all Nikon D3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Attach a Lens Care should be taken to prevent dust from entering the camera when the lens is removed. The lens generally used in this manual for illustrative purposes is an AF-S DX NIKKOR 18-55mm f/3.5-5.6G VR. Focal length mark X Focal length scale Lens cap Mounting mark CPU contacts (0 168) Rear lens cap Focus ring (0 42, 87) Zoom ring (0 24) A-M mode switch (see below) Vibration reduction switch (0 15) 1 Turn the camera off. 2 Remove the rear lens cap and the camera body cap. 3 Attach the lens. Keeping the mounting mark on the lens aligned with the mounting mark on the camera body, position the lens in the camera's bayonet mount (q). Being careful not to press the lensrelease button, rotate the lens counter-clockwise until it clicks into place (w). Slide the A-M mode switch to A (autofocus; if the lens has an M/A-M mode switch, select M/A for autofocus with manual override). D Autofocus Autofocus is supported with only AF-S and AF-I lenses, which are equipped with autofocus motors. Autofocus is not available with other AF lenses (0 167). 14