Nikon D3body D3 User's Manual - Page 125
Exposure Preview, Contrast-Detect Autofocus, rest of the way down to take
UPC - 074101484755
View all Nikon D3body manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
To preview exposure at current settings, press J. In exposure modes other than h, exposure can be adjusted by pressing the E button and rotating the main command dial (note that Exit while exposure compensation can be adjusted by ±5 EV, only values between -3 and +3 EV can be previewed in the monitor). A Exposure Preview Matrix metering is used to set exposure. Exposure can not be previewed when an optional flash unit is attached, bracketing is in k effect (pg. 134), active D-lighting is on (pg. 185), or shutter speed is set to A or "p" (flash sync speed). 6 Take the picture. Press the shutter-release button the rest of the way down to take the picture. If continuous high speed or continuous low speed is selected for [Release mode], the monitor will turn off while the shutter-release button is pressed. The frame advance rate for continuous mode is the same as that selected for standard shooting. D Contrast-Detect Autofocus The camera will not continue to adjust focus while a B button is pressed in continuous-servo autofocus mode. In both single-servo and continuous-servo autofocus modes, the shutter can be released even when the camera is not in focus. 99