Nikon D3body D3 User's Manual - Page 456
SB-400, SB-80DX, or SB-50DX is fully charged, Nikon Multi-CAM 3500FX autofocus module with TTL
UPC - 074101484755
View all Nikon D3body manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 456 highlights
Exposure Exposure lock ISO sensitivity (Recommended Exposure Index) Active D-Lighting Focus Autofocus Detection range Lens servo Focus point AF-area mode Focus lock Flash Flash control Flash mode n Flash-ready indicator Luminosity locked at detected value with AE-L/AF-L button ISO 200 - 6400 in steps of 1/3, 1/2, or 1 EV. Can also be set to approx. 0.3, 0.5, 0.7, or 1 EV (ISO 100 equivalent) below ISO 200 or to approx. 0.3, 0.5, 0.7, 1 (ISO 12800 equivalent), or 2 EV (ISO 25600 equivalent) above ISO 6400. Can be selected from [High], [Normal], or [Low] Nikon Multi-CAM 3500FX autofocus module with TTL phase detection, fine-tuning, 51 focus points (including 15 cross-type sensors) -1 - +19 EV (ISO 100, 20 °C/68 °F) • Autofocus: Single-servo AF (S); continuous-servo AF (C); predictive focus tracking automatically activated according to subject status • Manual (M): Electronic range finding supported Can be selected from 51 or 11 focus points Single-point AF, dynamic-area AF, automatic-area AF Focus can be locked by pressing shutter-release button halfway (single-servo AF) or by pressing AE-L/AF-L button • TTL: i-TTL balanced fill-flash and standard i-TTL flash for digital SLR using combined 1,005-segment RGB sensor are available with SB-800, SB-600, or SB-400 • Auto aperture: Available with SB-800 and CPU lens • Non-TTL auto: Supported flash units include SB-800, SB-28, SB-27, and SB-22s • Range-priority manual: Available with SB-800 Front curtain sync, slow sync, rear-curtain sync, red-eye reduction, red-eye reduction with slow sync Lights when Speedlight such as SB-800, SB-600, SB-400, SB-80DX, SB-28DX, or SB-50DX is fully charged; blinks after flash is fired at full output 430