Nikon D500 100th Anniversary Edition User Manual - Page 280
Setup Menu Options, Location data
View all Nikon D500 100th Anniversary Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 280 highlights
❚❚ Setup Menu Options The Location data item in the setup menu contains the options listed below. • Position: The current latitude, longitude, altitude, Coordinated Universal Time (UTC), and heading (if supported) as reported by the source device. • External GPS device options > Standby timer: Choose whether or not the standby timer is enabled when a GPS unit is attached. Option Enable Disable Description Standby timer enabled. The timer expires automatically if no operations are performed for the period specified in Custom Setting c2 (Standby timer, 0 296), reducing the drain on the battery. If a GP-1 or GP-1A unit is connected, the unit will remain active for a set period after the timer expires; to allow the camera time to acquire location data, the delay is extended by up to one minute after exposure meters are activated or the camera is turned on. Standby timer disabled, ensuring uninterrupted recording of location data. • External GPS device options > Set clock from satellite: Select Yes to synchronize the camera clock with the time reported by the GPS device. A Heading The heading is only recorded if the GPS device is equipped with a digital compass (note that the GP-1 and GP-1A are not equipped with a compass). Keep the GPS device pointing in the same direction as the lens and at least 20 cm (8 in.) from the camera. 254