Nikon D5600 Reference Manual - Page 227

D Burst Photography • Depending on shooting conditions and memory card performance, the memory card access lamp may light for anywhere from a few seconds to a few minutes. Do not remove the memory card while the memory card access lamp is lit. Not only could any unrecorded images be lost, but the camera or memory card could be damaged. • If the camera is switched off while the memory card access lamp is lit, the power will not turn off until all images in the buffer have been recorded. • If the battery is exhausted while images remain in the buffer, the shutter release will be disabled and the images transferred to the memory card. A The Memory Buffer • While the shutter-release button is pressed halfway, the camera will show the number of pictures that can be stored in the memory buffer. • When the buffer is full, the display will show t00 and the frame rate will drop. • The number shown is approximate. The actual number of photos that can be stored in the memory buffer varies with camera settings and shooting conditions. • Memory buffer capacity may drop briefly immediately after the camera is turned on. • Memory buffer capacity can be viewed in the monitor during live view. Shooting Settings 181