Nikon D5600 Reference Manual - Page 927

D Using Vibration Reduction: Notes • When using vibration reduction, press the shutter-release button halfway and wait for the image in the viewfinder to stabilize before pressing the shutter-release button the rest of the way down. • When vibration reduction is active, the image in the viewfinder may jiggle after the shutter is released, but this does not indicate a malfunction. • Slide the vibration reduction mode switch to NORMAL for panning shots. In NORMAL mode, vibration reduction applies only to motion that is not part of a pan. If the camera is panned horizontally, for example, vibration reduction will be applied only to vertical shake. • Do not turn the camera off or remove the lens while vibration reduction is in effect. If power to the lens is cut while vibration reduction is on, the lens may rattle when shaken, but this does not indicate a malfunction. The rattling will end when the lens is reattached and the camera turned on. • If the camera is equipped with a built-in flash, vibration reduction will be disabled while the flash charges. • In the case of cameras equipped with an AF-ON button, vibration reduction will not be performed when the button is pressed. • Select OFF when the camera is mounted on a tripod. Note, however, that ON is recommended if the tripod head is unsecured or the camera is mounted on a monopod. AF-S NIKKOR 24-120mm f/4G ED VR Lens Manual 881