Nikon D70s D70s User's Manual - Page 152
Custom Setting 5, ISO Auto
![]() |
UPC - 018208099894
View all Nikon D70s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Menu Guide-Custom Settings Custom Setting 5: ISO Auto To choose whether the camera automatically adjusts sensitivity (ISO equivalency) as necessary to achieve optimal exposure and flash level, highlight ISO auto in the CSM menu ( 135) and press the multi selector to the right. Press the multi selector up or down to highlight an option, then press to the right to make a selection. Option Description Off Sensitivity remains fixed at value selected by user ( 46), even if optimal (default) exposure can not be achieved. If optimal exposure and flash level can not be achieved at sensitivity selected by user, sensitivity is adjusted to compensate, to minimum approximately equivalent to ISO 200 and a maximum approximately equivalent to ISO 1600. ISO AUTO icon is displayed in control panel and viewfinder; unless Speedlight is used, icon blinks when sensitivity is altered from value selected by user. Note that noise is more likely at high sensitivities. • When mode dial is set to P, A or : camera auOn tomatically adjusts sensitivity when shutter speed needed to obtain opti- mum exposure would be faster than 1/8000 s or slower than value specified for P, A, DVP mode ( 143; shutter speed may drop below specified value if optimal exposure can not be achieved at ISO 1600 equivalent). • When mode dial is set to S: camera automatically adjusts sensitivity when limits of camera exposure metering system are exceeded. • When mode dial is set to M: camera automatically adjusts sensitivity when optimum exposure can not be achieved at selected shutter-speed and aperture. Using a Flash When ISO auto is on, foreground subjects may be underexposed in flash photographs taken at slow shutter speeds, in daylight, or against a bright background. Choose a flash mode other than slow sync or select mode A or M and choose a larger aperture. ISO Value The value displayed for sensitivity (ISO equivalency) when the ISO button is pressed is the value selected by the user. The value shown when ISO auto is on may differ from the value actually used by camera. 142
![](/manual_guide/products/nikon-d70s-d70s-users-manual-6aa4a6f/152.png)