Nikon D750 Product Manual - Page 212
Metering, Lowering the Built-in Flash, The Built-in Flash
![]() |
View all Nikon D750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 212 highlights
A Metering Select matrix, center-weighted, or highlight-weighted metering to activate i-TTL balanced fill-flash for digital SLR. Standard i-TTL flash for digital SLR is activated automatically when spot metering is selected. A Lowering the Built-in Flash To save power when the flash is not in use, press it gently downward until the latch clicks into place. D The Built-in Flash Remove lens hoods to prevent shadows. The flash has a minimum range of 0.6 m (2 ft) and can not be used in the macro range of zoom lenses with a macro function. i-TTL flash control is available at ISO sensitivities between 100 and 12800; at other sensitivities, the desired results may not be achieved at some ranges or aperture values. If the flash fires in continuous release modes (0 103), only one picture will be taken each time the shutter-release button is pressed. The shutter release may be briefly disabled to protect the flash after it has been used for several consecutive shots. The flash can be used again after a short pause. 184
![](/manual_guide/products/nikon-d750-product-manual-e27bcf6/212.png)