Nikon D750 Product Manual - Page 93

D Shooting in Live View Mode Although they will not appear in the final picture, jagged edges, color fringing, moiré, and bright spots may appear in the monitor, while bright bands may appear in some areas with flashing signs and other intermittent light sources or if the subject is briefly illuminated by a strobe or other bright, momentary light source. In addition, distortion may occur if the camera is panned horizontally or an object moves at high speed through the frame. Flicker and banding visible in the monitor under fluorescent, mercury vapor, or sodium lamps can be reduced using Flicker reduction (0 380), although they may still be visible in the final photograph at some shutter speeds. When shooting in live view mode, avoid pointing the camera at the sun or other strong light sources. Failure to observe this precaution could result in damage to the camera's internal circuitry. Movie recording is not available during live view photography and pressing the movie-record button has no effect. Select movie live view (0 66) to shoot movies. D The Count Down Display A count down will be displayed 30 s before live view ends automatically (0 63; the timer turns red if live view is about to end to protect the internal circuits or, if an option other than No limit is selected for Custom Setting c4-Monitor off delay > Live view; 0 337-5 s before the monitor is due to turn off automatically). Depending on shooting conditions, the timer may appear immediately when live view is selected. A HDMI If the camera is attached to an HDMI video device during live view photography, the camera monitor will remain on and the video device will display the view through the lens. 65