Nikon FM2 Instruction Manual - Page 31
Multiple, exposure, lever
UPC - 018208016839
View all Nikon FM2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Multiple exposure lever 5 Taking a picture of different subjects or two or more of the same subject on the same frame means multiple exposure. To make a multiple exposure, observe the following : 1) Take the first shot. (Press the shutter release button.) 2) Pull the multiple exposure lever in the direction of the arrow shown in the photo, as you wind the film advance lever fully. The frame counter will not advance ; only the shutter is ready to be released again. Although the finger pulling the multiple exposure lever will automatically slip off the lever as the film advance lever is wound, multiple exposure operation will have been performed correctly. 3) After winding the film advance lever fully, take the second shot . To take three exposures or more on the same frame , repeat the procedures described in 2) and 3). Note: In multiple exposure photography, the FM2 is designed to reduce film dislocation to the minimum. But it may occur due to film curling, film slack or inappropriate film winding. ~ '--" - "tt 31