Nikon FM2 Instruction Manual - Page 36

Interchangeable, focusing, screens - accessories

Get Nikon FM2 - FM2 - Body PDF manuals and user guides
UPC - 018208016839
View all Nikon FM2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

ACCESSORIES Interchangeable focusing screens Three different types of focusing screens are usable with the Nikon FM2 . The Type K2 screen comes with the camera as a standard accessory. Two optional focusing screens , Type B2 (matte/Fresnel with focusing spot) and Type E2 (matte/Fresnel with focusing spot and etched grid lines) are also available for the FM2 to match your particular requirements . To change focusing screens, follow this procedure: 1. Remove the lens from the camera body. 2. Slip the small tip of the special tweezers (that come with the optional screens) under the focusing screen release latch ® at the top front of the mirror box casting and pull outward to spring open the holder. 3. Take the screen out by grasping the small tab with the tweezers . 4. Carefully position another screen in place with the flat side facing down and the side with the tab facing up. 5. Then push the front edge of the holder upward with the tweezers until it clicks into position . Note: To avoid getting smudges or fingerprints on the screen 's optical surface, do not handle the screen with your fingers. 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
ACCESSORIES---------------------------
Interchangeable
focusing
screens
Three different types of focusing screens are usable with the
Nikon FM2 . The
Type
K2
screen comes with the camera
as
a
standard accessory.
Two
optional focusing screens,
Type
B2
(matte/Fresnel with focusing spot) and
Type
E2
(matte/Fresnel
with focusing spot and etched grid lines) are also available for
the FM2
to
match your particular requirements.
36
To
change focusing
screens,
follow
this
procedure:
1. Remove the lens from the camera body.
2. Slip the small tip of the special tweezers (that come with the
optional screens) under the focusing screen release latch
®
at the top front of the mirror box casting and pull outward
to
spring open the holder.
3.
Take
the screen out by grasping the small tab with the tweez-
ers.
4. Carefully position another screen
in
place with the flat side
facing down and the side with the tab facing up.
5.
Then push the front edge of the holder upward with the tweez-
ers until
it
clicks into position.
Note:
To
avoid getting smudges or fingerprints
on
the screen
's
optical
surface, do not handle the screen with your fingers.