Nikon N70 Instruction Manual - Page 86

USING BUILT-IN FLASH When subject brightness is insufficient, the flashrecommended light (green ~) lights up inside the viewfinder when you lightly press shutter release button to activate the exposure meter. You can use the built-in flash anytime, regardless of ambient lighting. For example, if your subject is backlit, you can use the built-in flash to illuminate your subject and fill in shadows. AUTOMATIC BALANCED FILL-FLASH WITH TTL MULTI SENSOR-3D MULTI-SENSOR BALANCED FILL- FLASH AND MULTI-SENSOR BALANCED FILL-FLASH Combined with aD-type AF Nikkor lens, in automatic exposure mode, the N70's built-in flash performs 3D Multi-Sensor Balanced Fill-Flash. In 3D Multi-Sensor Balanced Fill-Flash operation, just alter you depress shutter release button and before the shutter is activated, the built-in flash will fire a series of weak pre-flashes (Monitor Pre-flashes) that are detected by the camera's TIL Multi Sensor, then analyzed for brightness and contrast. Additionally, Distance Information from the D-type AF Nikkor lens in use, along with other exposure control information, is integrated, thus automatically compensating flash output level so that flash output and ambient light are balanced. The Monitor Pre-flashes enable 3D Multi-Sensor Balanced Fill-Flash to ensure correct exposure even in difficult situations, including scenes with a very reflective object such as a mirror or a white wall, and scenes with a very dark backgrounds. 3D Multi-Sensor Fill-Flash is performed with all the meters-Matrix, Center-Weighted and Spot. When the camera and the built-in flash are used with a non-Dtype AF Nikkor lens, Multi-Sensor Balanced Fill -Flash, which offers the same flash output control system but without Distance Information, is performed. 86