Nikon R1 Wireless Close-Up Speedlight System Users Manual - English - Page 61
Using the SB-R200
View all Nikon R1 Wireless Close-Up Speedlight System manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
2 Using the SB-R200 1 Slide open the battery chamber lid in the direction of the arrow. ON/OFF ON/OFF z Functions and use of the SB-R200 AS-20 2 Install the battery, then close the battery chamber lid by sliding it into place. Use CR123A (3V) lithium batteries. SPWEIERDELLIEGSHST ON/OFF Replacing the battery When the SB-R200's battery power is weak, the green ready-light blinks after the power has been turned on or after the flash has fired • Replace the battery. LOCK 3 Slide the SB-R200's Mounting Foot into the Speedlight Stand AS-20's Speedlight Mounting Shoe and slide the lock switch. The Mounting Foot cannot be inserted in reverse. • Slide the lock switch until it stops and make sure that the red part can no longer be seen. u Attaching the SB-R200 to the front of the lens • The SB-R200 can be attached to the front of the lens using the Attachment Ring SX-1 (p. 31). 61