Nikon S230 S230 User's Manual - Page 165
Electronically Controlled Cameras, Shooting, Date imprint, Sports, Museum, Panorama assist - troubleshooting
UPC - 018208261451
View all Nikon S230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Troubleshooting Problem Cause/Solution Date not appearing on Date does not appear on movies, on pictures taken pictures even when using d (Sports scene mode), l (Museum scene Date imprint is enabled. mode), p (Panorama assist scene mode), when Blink proof is set to On in smile mode, when the Continuous setting is set to Continuous or BSS, or when Electronic VR is set to Auto. Camera settings reset. Backup battery is exhausted; all settings were restored to their default values. Monitor turns off, and the power-on lamp and flash lamp blink rapidly. Battery temperature is high. Turn off camera, and allow battery to cool down before resuming use. After the lamps blink for three minutes, the camera will turn off automatically. Pressing the power switch also turns off the camera. A 38, 41, 42, 51, 82, 113, 128 131 19 Electronically Controlled Cameras In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the battery, then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon-authorized service representative. Note that disconnecting the power source as described above may result in the loss of any data not recorded to internal memory or the memory card at the time the problem occurred. Data already recorded will not be affected. Technical Notes Shooting Problem Cause/Solution A No picture taken when shutter- • When camera is in playback mode, press the 30 release button is pressed. A button or the shutter-release button. • When menus are displayed, tap H. 14 • Battery is exhausted. 24 • When flash lamp blinks, flash is charging. 33 Camera cannot focus. • The intended subject is one with which 29 autofocus does not perform well. • Focus error. Turn camera off and then on 24 again. 153