Nikon S640 S640 User's Manual - Page 156
Error Messages
UPC - 018208261826
View all Nikon S640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Error Messages The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them. Display O (blinks) B N Battery exhausted. P Battery temperature high Q (blinks red) P Please wait for the camera to finish recording. N Memory card is write protected. P This card cannot be used. P This card cannot be read. Problem Clock not set. Battery is running low. Solution Set clock. Prepare to charge or change battery. A 120 14, 16 Battery exhausted. Charge or replace battery. 14, 16 Battery temperature is high. Turn off camera, and allow battery to cool down before resuming use. After five seconds, this message will disappear, the monitor will turn off, and the power-on lamp will blink rapidly. 19 After the lamp blinks for three minutes, the camera will turn off automatically, but you can also press the power switch to turn it off manually. Camera cannot focus. • Refocus. • Use focus lock. 28, 29 105 Camera cannot perform other operations until recording is complete. Wait until message clears from display automatically when - recording is complete. Write-protect switch Slide the write-protect switch to is in "lock" position. "write" position. 23 Error accessing memory card. • Use an approved card. 138 • Check that connectors are 22 clean. • Confirm that memory card is 22 correctly inserted. Technical Notes 144