Nokia 002D2Q8 User Guide - Page 83
Offline profile, 3-D tones
View all Nokia 002D2Q8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Personalise your device If you want the caller's name to be spoken when your device rings, select Options > Personalise, and set Say caller's name to On. The caller's name must be saved in Contacts. To create a new profile, select Options > Create new. Offline profile The Offline profile lets you use the device without connecting to the wireless network. When you activate the Offline profile, the connection to the wireless network is turned off, as indicated by in the signal strength indicator area. All wireless RF signals to and from the device are prevented. If you try to send messages, they are placed in the outbox to be sent later. When the Offline profile is active, you can use your device without a (U)SIM card. Important: In the offline profile you cannot make or receive any calls, or use other features that require cellular network coverage. Calls may still be possible to the official emergency number programmed into your device. To make calls, you must first activate the phone function by changing profiles. If the device has been locked, enter the lock code. When you have activated the Offline profile, you can still use the wireless LAN, for example, to read your e-mail or browse on the internet. Remember to comply with any applicable safety requirements when establishing and using a wireless LAN connection. See 'Wireless LAN', p. 26. You can also use Bluetooth connectivity while in the Offline profile. See 'Bluetooth connectivity', p. 28. To leave the Offline profile, press the power key, and select another profile. The device re-enables wireless transmissions (providing there is sufficient signal strength). 3-D tones Press , and select Tools > 3-D tones. With 3-D tones you can enable three-dimensional sound effects for ringing tones. Not all ringing tones support 3-D effects. To enable the 3-D effects, select 3-D ringing tone effects > On. To change the ringing tone, select Ringing tone and the desired ringing tone. To change the 3-D effect that is applied to the ringing tone, select Sound trajectory and the desired effect. To modify the effect, select from the following settings: Trajectory speed-Scroll left or right to adjust the speed at which sound moves from one direction to another. This setting is not available for all ringing tones. Reverberation-Select the type of echo. 83