Nokia 500 Auto Navigation User Guide - Page 16
Install the device in a car, General safety instructions
View all Nokia 500 Auto Navigation manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Get started To turn off Bluetooth connectivity when a device is connected to the navigation device, press the menu key, and tap Phone > > > Yes. To turn on Bluetooth connectivity, press the menu key, and tap Phone > > > Yes. ■ Install the device in a car To install the navigation device in a car, attach the HH-12 mounting device to the CR-91 mobile holder, attach the mounting holder to the windscreen, and place the navigation device into the mobile holder. It is advised that you do not leave the mounting device or the mobile holder visible in the car to prevent theft when you exit the car. General safety instructions Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. Only operate the mounting device, mobile holder, or navigation device if it is safe to do so under all driving conditions. When you install the mounting device or mobile holder, ensure that they do not interfere with or hinder the steering or braking systems or other systems used in the operation of the vehicle (for example, airbags) or disturb your field of vision while driving. Check that the deployment of the airbag is not blocked or impaired in any way. Ensure that the mounting device or mobile holder is not installed where you might come in contact with it in the event of an accident or collision. Periodically check that the suction cup at the bottom of the mounting device is firmly attached to the windscreen, especially if the ambient temperature changes a lot. Do not leave the product parts inside the vehicle in direct sunlight or in excessive heat. The product may be damaged if the operating temperature falls below -25°C (-13°F) or exceeds +55°C (131°F) or if the 16